Selecting the Right Wallpaper and the Required Tools
Getting the right peel and stick marble wallpaper is crucial for a successful DIY wallpaper installation. It is essential to measure the exact area that requires covering, so at least 10% additional material is purchased in case of errors. Additionally, get the required tools like a measuring tape, smoothing tool, razor or cutter, and a step-stool or ladder, depending on the height of the installation area.
Preparing the Surface Before Installing the Wallpaper
Surface preparation is the key to a smooth wallpaper installation. For best adhesion, the surface must be smooth and clean, free from moisture and debris. If the surface has existing wallpaper, it must be removed, and any holes or cracks patched, using spackle or putty. Use a sponge and detergent to wash the wall and let it dry for a day or two, before applying the wallpaper. If there are any electrical outlets or switchboards on the wall, remove them, and reinstall them after the wallpaper installation is completed.
Peel and Stick Wallpaper Installation Tips
After selecting the right wallpaper and preparing the surface, it’s time to install the marble wallpaper. Firstly, unroll the wallpaper roll and measure it against the wall height, adding an extra inch at the top and bottom. Cut the wallpaper to size and roll similar-sized sections, using measurements taken from the wall, either using scissors or a razor. Gently peel off the adhesive backing and apply the wallpaper against the wall, from the top to the bottom, avoiding any air bubbles. Use a smoothing tool to press the wallpaper edges firmly, smoothing it outwards to prevent wrinkles, and remove any excess wallpaper with a razor, if needed.
Tips for Cutting Wallpaper Around Obstacles
Different tools are requires for cutting the wallpaper around protruding obstacles like electrical sockets, light switches, and corners. For outlets and switches, measure the dimensions and cut the wallpaper accordingly. Fold the wallpaper back and forth over the switch or outlet, so the excess can be precisely cut away, using a razor or cutter. Once the switch cover is replaced, the cuts will be invisible. For corners, measure the distance from the corner to the edge of the wall and cut the wallpaper to fit. Finally, use the smoothing tool to press the wallpaper firmly against the wall, over the obstacle.
Caring for the Wallpaper After Installation
To keep your peel and stick marble wallpaper looking brand new for longer, be gentle while cleaning it. Use a damp cloth or sponge for spot-cleaning. Avoid using any abrasive cleaners or scrubbing tools as they can cause scratches and damage the wallpaper pattern. To maintain the wallpaper’s adhesive properties, avoid exposing it to high humidity or moisture levels or areas where there’s continuous water splash like shower areas or above a sink.
Congratulations, you are done installing your very own peel and stick marble wallpaper. The above tips are sure to make the DIY installation project a rewarding experience with minimum frustration. Remember to take your time, go slowly, and measure everything precisely, giving your space the desired ambiance and an elegant feel. For a comprehensive grasp of the subject, we suggest this external source providing extra and pertinent details. peel and stick marble wallpaper, immerse yourself further in the topic and uncover fresh viewpoints!
Looking for more information related to this topic? Explore the related posts we’ve prepared to enhance your research: